Home :: Sales :: Cleaning & Care Products :: Aurora :: ALUMETRON
Printable version

ALUMETRON

ALUMETRON
ALUMETRON Fights Corrosion
Perfectly Clear, Long Lasting
Protection for All Marine Aluminum
New Product Introduction
ALUMETRON is a new discovery from Aurora Marine Industries.
It’s a perfectly clear polymer coating that bonds to aluminum. The bond is both chemical as well as mechanical giving it incredible durability, making it suitable for constant water immersion in fresh as well as salt water. It’s perfect for aluminum pontoons and fishing boats. You’ll love how it keeps your pontoons shiny and free from oxidation and staining, saving you money and countless of hours of clean up time. The results are 100% guaranteed or your money back. This new technology is water based so it is safe for the environment and it's non-hazardous. It’s very quick and easy to apply. Just wipe it on with a cloth. This is without a doubt the best investment that you can make in protecting your boat and enhansing it's value.
How to Use
English
ALUMETRON is an easy to apply clear polymer coating that bonds chemically and mechanically to aluminum for a smooth, durable, protective finish that resists environmental damage and attachment of dirt. It keeps your aluminum looking shiny and new all season even with constant water immersion.

DIRECTIONS
PREPARATION:
New Aluminum: Clean & degrease aluminum with 1:4 solution of BOAT CLEAN PLUS™ and water. Wash surface with MARINE SCRUB MITT™, cloth, sponge, or pressure washer. Hot water improves cleaning. Rinse and dry.
Fouled Aluminum: Remove fouling from aluminum with ALGEX™. Clean & degrease as above.
Tarnished Aluminum: Remove oxidation and stains with ALUMABRITE™. Clean & degrease as above.

COVERAGE:
450ml / 16oz- 200 ft²
3.8L / 1US gal - 1,600 ft²

APPLICATION: Surface must be clean and dry.
Wipe: Apply 4 thin coats ALUMETRON. Wipe on with a lint free cloth pad, in long, even, overlapping strokes. Do not overwork application or bubbles and streaking will result.
Spray: Use HVLP gun with fine tip. Apply fine preliminary tack coat and follow with a build coat before it dries. Build to 1 Mil thick. When dry to recoat, apply 2nd coat to 1 Mil.

CURE TIME at 77°F - 50% R.H.:
To touch 10 min.
To recoat 20 min.
To light service 8 hrs.
To full cure 48 hrs.
To water immersion 96 hrs.
To application of VS721 96 hrs.

CLEAN UP: Soap & Water

DAMAGE REPAIR: Repair scratched or abraded surface by cleaning damaged area as above and apply 4 thin coats of ALUMETON with a folded cloth pad.

STRIPPING: Apply AURORA SR515™. Wait 20 to 30 min. Wipe off aluminum. Wash with 1:4 solution BOAT CLEAN PLUS and water and rinse clean.

WATER IMMERSION: To protect surfaces that will be continuously submerged, against marine fouling, apply 2 coats VS721 BOTTOM COAT™ to fully cured areas that are below the waterline.

SAFETY: Wear a respirator when spraying. Wear safety glasses and protect skin from excessive exposure. If splashed in eyes, rinse with water for 10 minutes. If on skin, wash with soap and water.

https://www.auroramarine.com/store/alumetron.html
SKU B01260
Weight 1.00 lbs
 
Our price: $ (CAD)48.96
Qty
Add to wish list
  • Ask a question about this product
: *
: *
: *
 
Iron Heavy-duty hand Snap Pres
 
BRISA
 
PLASTIC WASHER 510 -40C WHITE
Iron Heavy-duty hand Snap Pres
 
 BRISA
 
 PLASTIC WASHER 510 -40C WHITE
$ (CAD)169.99
 
 
 
ΠΟΛΥΕΣΤΕΡΙΚΗ ΠΟΜΠΙΝΑ 450γρ. Νο.138 (12) 2500μ. ΜΑΥΡΟ
 
SELF ADHESIVE HOOK-LOOP: 3/4" (20mm) Hook - Loop
 
Full Casseted Awning
ΠΟΛΥΕΣΤΕΡΙΚΗ ΠΟΜΠΙΝΑ 450γρ. Νο.138 (12) 2500μ. ΜΑΥΡΟ
 
 SELF ADHESIVE HOOK-LOOP: 3/4" (20mm) Hook - Loop
 
 Full Casseted Awning
 
$ (CAD)0.75
 
 
Vinyl Top 1
 
Fenda Sox®
 
BLACK STREAK REMOVER ™
Vinyl Top 1
 
 Fenda Sox®
 
 BLACK STREAK REMOVER ™
 
$ (CAD)27.99
 
$ (CAD)25.90

Product rating

Customer Reviews

There have been no reviews for this product.

Add your review here

: *
: *
Type the characters you see in the picture:


*